High-Performance 120 Series Casement Window

Casement Window

High-Performance 120 Series Casement Window

Specifications

Ebon Tongtai - Exploring Beauty, Offering Novelty

20+ years

Deeply committed to high-performance thermal-break windows and doors.

100,000 m²

Four modern intelligent manufacturing bases across China.

200+

High-performance thermal-break window & door technology patents.

≥97%

3i-Low-E glass advanced thermal & UV solar protection.

Technical Parameters

Parameter	Specification
No parameter specifications uploaded.

Profile Information

Item	Dimension Data

Glass Sash Width & Thickness	Width 70mm, Thickness 75.9mm, Glass Notch 41mm (2-glass) / 50mm (3-glass)
Screen Sash Width & Thickness	Width 45mm, Thickness 29.2mm
Frame Width & Height	Wall Occupancy 112mm, Frame Width 47.4mm

Profile Display Drawing

Glass Configuration

Configuration	Opening Sash Glass Specification
Standard Double Glazing Solution	5mm + 20A + 5mm Insulating Glass, with internal and external rubber gaskets, using pressing strip WKC120-07B
Standard Triple Glazing Solution	5mm + 12A + 5mm + 12A + 5mm Insulating Glass (standard with 3i-Low-E glass), with internal and external rubber gaskets, using pressing strip WKC112-07B

Optional Glazing Solution

Configuration	Fixed Glass Specification

Optional Double Glazing Solution	8mm + 15A + 8mm Insulating Glass, with internal and external rubber gaskets, using pressing strip WKC120-06A
Optional Double Glazing Solution	8mm + 24A + 8mm Insulating Glass, with internal and external rubber gaskets, using pressing strip WKC120-06B
Optional Double Glazing Solution	10mm + 20A + 10mm Insulating Glass, with internal and external rubber gaskets, using pressing strip WKC120-06B
Optional Double Glazing Solution	12mm + 20A + 12mm Insulating Glass, with internal and external sealant application, using pressing strip WKC120-06B

Review is required for large glass panels used in high-rise buildings; consult the technical department for special specifications

Basic Technical Requirements and Parameters

Standard Configuration：

1.Standard: Outward opening (glass outside, screen inside), outward opening and bottom-hung. 2.Standard: HOPO hardware internal components + HOPO external components (black/silver). 3.Screen sash: Standard configuration of diamond mesh (thickness: 0.4mm). 4.Standard: Integrated vulcanized welded duckbill rubber gasket. 5.Standard: 4mm zinc alloy corner guard. 6.Standard: Dimension recommendations (sash width: 400-750mm, sash height: 600-1500mm), handle height shall not be less than 280mm (relative to sash height). (Load-bearing capacity: 60KG). For sash width exceeding 550mm, lifting blocks shall be added.

Basic Technical Requirements and Parameters

Optional Configuration：

1.Optional Configuration: HOPO Shenzhen outward opening and bottom-hung hardware. Dimension requirements: sash width 530mm-850mm, sash height 680mm-1950mm (load-bearing capacity 80KG). Handle height: minimum 380mm (relative to sash height); when the handle is installed in the center, the minimum sash height shall be 760mm. The anti-falling device shall be installed 223mm away from the upper notch. It is recommended to install an intermediate lock if the sash height exceeds 1200mm. 2.Optional monochrome dedicated operable guardrail (elliptical anti-theft grid) / optional fixed guardrail. 3.Optional screen sash mesh: 25# high-definition mesh, high-transparency mesh (nylon mesh).

Special Instructions:

1.When the mullion height is ≥ 2500mm, it is recommended to install the optional reinforced mullion (MA11206). 2.When the glass thickness is ≥ 8mm, the bottom frame shall be fitted with a reinforced aluminum strip. In addition, if the glass area exceeds 4 ㎡ or the height is ≥ 2500mm, the vertical mullion shall be fitted with a reinforced aluminum strip at the same time. 3.This series is designed with beveled line pressing strips and is not available for flat bending or three-dimensional bending for the time being. New profiles and functional components will be developed according to future requirements.

Process Requirements：

1.45° miter joints shall be coated with section waterproof sealant. Waterproof sealant shall be applied to the joints between the outer frame and mullions; foam sealant shall be filled between the outer frame and subframe; and corner connectors shall be injected with glue. 2.When the sill (MA11208) is equipped, hidden drainage holes shall be drilled on the bottom frame. 3.The thermal insulation strips shall comply with the new national standard. Triple-glazed insulating glass shall be standard-equipped with 3i-Low-E glass.

Photos of Exterior Handles

Corner Profile

Order Taking Notes & Technical Parameters

1.Before window and door design, the thickness of the installation wall shall be confirmed to select the corresponding series and pocket sleeves. 2.When placing an order, the internal and external colors shall be clearly specified. 3.When placing an order, the glass specifications must be indicated. If there are no special instructions, the production shall be carried out in accordance with the standard - equipped glass by default. 4.If the construction is mainly based on elevator or stair tr

High-Performance 120 Series Casement Window

Category

High-Performance 120 Series Casement Window